Shopping Cart Items: 0   Sub-Total : US$0.00
Welcome, Guest ( Login )

Metal Doumbek Accessories


Metal Doumbek, Outside Tunable Clamps (Item Code: MDCP)
Set of 4 angled Replacement clamps for exterior Metal doumbeks. Hook and Nut. Hook is approximately 2 1/8 inches over all length. Thread length along shaft is 3/4 of an inch.

Long Clamps for outside tunable metal doumbeks. Set of 4 Hooks and 4 Nuts. Hook is approximately 2-3/8 inches (60 mm) in overall length. Thread length along shaft is 7/8 of an inch (22 mm). Actual measurements may vary.

Metal Doumbek Tuning Rings, for 12 inch Drum (Item Code: MD12-TR) the smooth top ring with inside diameter of approximately 12 1/4 inches to fit over the drum head. The flat bottom ring has the tabs for the tuning bolts and is approximately 11 11/16 inches inside diameter. Fits the Metal Doumbeks: MD12, MB12, M12J.
Hand made, sizes will vary slightly. Tuning bolts (MDCP, MDCP-L) and replacement heads (SS12, SD12, SH12, SH12G) sold separately.

Shoulder Strap For External Tune Doumbek (Item Code: HK-3200-DK) Remo Doumbek Drum Strap comes in three parts.
One strap
Small loop rope
Harness rope with clear tube
Strap Instructions:
1. Attach the harness and small loop rope on each end of the drum strap.
2. Now loosen one tuning lug and place the small loop rope between the drum and shell of counter hoop. Make sure loop rope is centered over the lug hole.
3. Now, reinsert lug and tighten.
4. Open the harness and loop it around the base of the doumbek.
5. Place the strap over head onto one shoulder.
Harness will settle in the middle of the drum. Now you can play seated or standing.

This 6 course lute features a bowl constructed of 13 sheesham staves. The scale length is 600 mm. Materials: The neck, bowl, nut, bridge, and end pin are sheesham. The peg box is sheesham. The soundboard is spruce.

Important Specifications. In Inches:
Body/Bowl: 17.5 L x 6.5 H x 12.25 W
Neck at Nut: 2.12 W
Neck at Body Joint: 2.62 W
Nut: 2.12 W
Strings at the Nut: 1.75 W
Strings at Bridge: 3 W
Scale Length: 23.62 (60cm)

11 sheesham tuning pegs; recommended Tuning:
G4, D4, D4, A3, A3, F3, F3, C4, C3, G3, G2

BLEMISHED This eight course lute has a natural finish and is made for a right handed player. You can easily attach your own shoulder strap for playing to the end peg.

The body has sheesham staves accented white pinstripes in between. The neck, end peg and tuning pegs are also made out of sheesham. The nut is bone. The mustached bridge is sheesham, a top section of lacewood adds elegance and strength. The sound board is made out of Canadian spruce and the single sound hole has an intricate laser cut design. This lute has 8 nylon frets on neck and 4 finished sheesham frets on sound board. There are 4 nylon wound strings and 11 rectified nylon strings in seven courses of two strings and one course of a single string.

The tuning for this Lute is the normal 8 course tuning, but can vary depending on player preference. The, 15-strings 8-course, suggested tuning from high to low is: G4, D4/D4, A3/A3, F3/F3, C4/C3, G3/G2, F3/F2, D3/D2.

Accessories included: the book: Learning to Play the Lute" (LUTB) and a padded gig bag.

Important Specifications:

Body/Bowl : 18 inches in length, 7 inches in height and 12.25 inches in width

Neck at Nut : 2.79 inches in width

Neck at Body Joint : 3.3 inches in width

Nut : 2.79 inches in width, .23 inches in height. Made from sheesham and has string slots

Scale Length : 23.68 inches

15 sheesham tuning pegs

This 6 course lute features a bowl constructed of 25 fluted sheesham staves. The scale length is 600 mm. Materials: The neck, bowl, nut, bridge, and end pin are sheesham. The peg box is sheesham and lacewood. The soundboard is spruce. A padded gig bag is included with the instrument.

Important Specifications:

Body/Bowl : 17.5 inches in length, 6.5 inches in width and 12.25 inches in height

Neck at Nut : 2.12 inches in width

Neck at Body Joint : 2.62 inches in width

Nut : 2.12 inches in width

Strings at the Nut : 1.75 inches in width

Strings at Bridge : 3 inches in width

Scale Length : 23.62 inches (60cm)

11 sheesham tuning pegs

BLEMISHED: This 6 course lute features a bowl constructed of 25 fluted sheesham staves. The scale length is 600 mm. Materials: The neck, bowl, nut, bridge, and end pin are sheesham. The peg box is sheesham and lacewood. The soundboard is spruce. A padded gig bag is included with the instrument.

Important Specifications:

Body/Bowl : 17.5 inches in length, 6.5 inches in width and 12.25 inches in height

Neck at Nut : 2.12 inches in width

Neck at Body Joint : 2.62 inches in width

Nut : 2.12 inches in width

Strings at the Nut : 1.75 inches in width

Strings at Bridge : 3 inches in width

Scale Length : 23.62 inches (60cm)

11 sheesham tuning pegs

BLEMISHED: This 6 course lute features a bowl constructed of 25 fluted sheesham staves. The scale length is 600 mm. Materials: The neck, bowl, nut, bridge, and end pin are sheesham. The peg box is sheesham and lacewood. The soundboard is spruce. A padded gig bag is included with the instrument.

Important Specifications:

Body/Bowl : 17.5 inches in length, 6.5 inches in width and 12.25 inches in height

Neck at Nut : 2.12 inches in width

Neck at Body Joint : 2.62 inches in width

Nut : 2.12 inches in width

Strings at the Nut : 1.75 inches in width

Strings at Bridge : 3 inches in width

Scale Length : 23.62 inches (60cm)

11 sheesham tuning pegs

This 6 course lute features a bowl constructed of 25 fluted walnut staves. The scale length is 600 mm. Materials: The neck, bowl, nut, bridge, and end pin are walnut. The peg box is walnut and lacewood. The soundboard is spruce. A padded gig bag is included with the instrument.

Important Specifications:

Body/Bowl : 17.5 inches in length, 6.5 inches in width and 12.25 inches in height

Neck at Nut : 2.12 inches in width

Neck at Body Joint : 2.62 inches in width

Nut : 2.12 inches in width

Strings at the Nut : 1.75 inches in width

Strings at Bridge : 3 inches in width

Scale Length : 23.62 inches (60cm)

11 walnut tuning pegs

Metal Doumbek, Outside Tunable Clamps (Item Code: MDCP)
Set of 4 angled Replacement clamps for exterior Metal doumbeks. Hook and Nut. Hook is approximately 2 1/8 inches over all length. Thread length along shaft is 3/4 of an inch.

Products

Top Sellers

100% Secure!

Essential SSL

Mini Cart

Your Cart Is Empty

Follow us on Twitter

Facebook Chat Module

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
0 Item(s)
US$0.00